| Assistor and additive for PU transfer coating and finishing |
| Product |
Description |
| Levelling agent |
|
| SA-915A |
Improve levelling and wetting, well compatible with PU resin, avoid pin holes |
| BA-003 |
Multifunctional agent.well compatible with PU resin. improve wetting/levelling and pigment dispersion, avoid pin holes/water spot |
| SA-911 |
Avoid water/oil spot, pin holes and blocking |
| |
|
| Touch agent |
|
| NPA-42 |
Grease touch agent, antislip effect, No migration and non-sticky |
| SA-936 |
Sticky touch agent, well compatible with PU resin. |
| SA-931 |
Sliding touch agent, improve abration resistance, both for water and solvent system. |
| NP-04A |
Sliding touch wax, natural leather touch, well compatible with PU resin, improve abration resistence |
| SA-933 |
Fatty touch agent, No migration, be used for dry skin and finishing |
| SA-932 |
Fatty touch agent, be used for dry skin and finishing |
| |
|
| Anti-Blocking agent |
|
| SA-922 |
Anti-blocking agent for high glossy product and patent release paper |
| SA-923 |
Anti-blocking agent, improving paper release, levelling and shine of film , dry touch, |
| SA-924 |
Anti-blocking agent for semi-PU, high temperature resistence, improving levelling and eliminating air buble. |
| SA-925 |
Anti-blocking and levelling agent, well compatible with PU resin, avoid pin holes |
| |
|
| Other agent |
|
| SA-901 |
Dispersion improving agent, improving the dispersion of wax, pigment and matting powder etc and decrease the viscosity. Used both for water and solvent system. |
| SA-904 |
Pigment dispersion improving agent. Used for dry process and wet process, improving the mixing of pigments and the homogeneous, brightness of colour |
| NPA-91 |
Low-temperature flexibility improving agent, used both for PU and PVC, improving the softness and hydrolysis resistence of film. |
| Np-07 |
water absorbent additive for dry process, could be used for absorbent lining |
| |
|
| Pull-up additive |
|
| NP-01A |
Pull-up additive, high temperature resistence, used both for Pu and semi PU, good transparency and recoverbility, natural leather like, good solvent resistence |
| NP-01H |
Pull-up additive, high temperature resistence, used both for Pu and semi PU, good abration resistence and recoverbility, sliding and dry touch |
| |
|
| Expanding Powder |
|
| GNP-804E |
Long pile type, suede effect, expanding temperature:150-155℃ |
| GNP-211E |
Short pile type, suede effect, expanding temperature:150-156℃, good solvent resistence |
| GNP-191E |
Fine pile type, suede effect, expanding temperature: 130-140℃ |
| NP-80 |
Fine pile type, suede and writing effect, expanding temperature: 130-140℃ |
